Caster Adapter for Metal Bakers Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Awhile back I bought a set of casters in hopes to fit my bakers rack. I did not test fit the casters when they arrived…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Awhile back I bought a set of casters in hopes to fit my bakers rack. I did not test fit the casters when they arrived (or within the return period) as I was unable to fully access the rack. When I finally got around to this..I found the casters I ordered would not fit the threads on the legs of the bakers rack. I then decided to design and print a set of adapters that would allow me to use the casters I purchased. So far I am quite happy with the results and I will upload more pictures once I get the last caster mounted to the final adapter that just finished printing. I decided to use a couple drops of hot glue to secure these in place even though there is a good interference fit already. The adapters fit 3/4" (19mm) round tubes which is about the standard size although I do see one of my other racks is 1" (25mm)
For this Bakers Rack and other racks with 19mm (3/4") tubes.. https://www.amazon.com/gp/product/B0014QS1XC
Casters I used are here.. https://www.amazon.com/gp/product/B01LWO1P2F
I will upload a 25mm size in the near future and if you need any other sizes please feel free to post up a request. I am also including the sketchup files for those wanting to mod the design themselves. Cheers!
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
No
Supports:
No
200
Infill:
70
Category: Kitchen & Dining