3DP XL SphereBot (Fully 3D Printed Eggbot)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3DP XL SpherebotFully 3D printed (bolt and/or glue together) Extra Large Eggbot/SpherebotFiles for a standard size…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
3DP XL Spherebot
Fully 3D printed (bolt and/or glue together) Extra Large Eggbot/Spherebot Files for a standard size version are included.
5mm and 4mm shaft options...comment below if you desire a different shaft diameter for the driver egg cup and pen pivot motor shaft adapter.
I will be printing the XL version very soon.
I am working on publishing an instructable for the assembly...it should be pretty straight forward but due to my use of the dovetail joints, a specific order is required for assembly.
This can be bolted together and/or glued together...I glued mine with ABS Juice and used clamps to hold the parts while the ABS Juice dried.
DO NOT print "SphereBot_XL_Assembled.stl" file, it is for assembly reference only!
Print Settings
Printer:
FFCP, Dup4
Rafts:
Doesn't Matter
Yes
Resolution:
200 microns (0.20mm)
30%+
Notes:
Support only required on a few parts (drive/idler cups, bearing holder) Print bed adhesion promoter and the use of "helper discs" at the corners is highly recommended to prevent warping/peeling.
Category: 2D Art