3DP XL SphereBot (Fully 3D Printed Eggbot)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3DP XL SpherebotFully 3D printed (bolt and/or glue together) Extra Large Eggbot/SpherebotFiles for a standard size…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 14
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
3DP XL Spherebot
Fully 3D printed (bolt and/or glue together) Extra Large Eggbot/Spherebot Files for a standard size version are included.
5mm and 4mm shaft options...comment below if you desire a different shaft diameter for the driver egg cup and pen pivot motor shaft adapter.
I will be printing the XL version very soon.
I am working on publishing an instructable for the assembly...it should be pretty straight forward but due to my use of the dovetail joints, a specific order is required for assembly.
This can be bolted together and/or glued together...I glued mine with ABS Juice and used clamps to hold the parts while the ABS Juice dried.
DO NOT print "SphereBot_XL_Assembled.stl" file, it is for assembly reference only!
Print Settings
Printer:
FFCP, Dup4
Rafts:
Doesn't Matter
Yes
Resolution:
200 microns (0.20mm)
30%+
Notes:
Support only required on a few parts (drive/idler cups, bearing holder) Print bed adhesion promoter and the use of "helper discs" at the corners is highly recommended to prevent warping/peeling.
Category: 2D Art