1 / 4
Zuru X-Shot Reflex 6 - 18 Short Dart Inline Cylinder — zdjęcie 1
1 / 4

Zuru X-Shot Reflex 6 - 18 Short Dart Inline Cylinder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrades the Reflex 6's capacity to 18 Short Darts(or 12 Whole Darts) in an Inline configuration.

Ocena
0 / 5
Polubienia
9
Pobrania
33
Wydruki
0
Wyświetlenia
466
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Zuru X-Shot Reflex 6 - 18 Short Dart Inline Cylinder

 

Upgrades the Reflex 6's capacity to 18 Short Darts(or 12 Whole Darts) in an Inline configuration. Can fit 24 Short Darts if you just want max capacity.  Designed with rear loading mods in mind. Must Remove the Reflex 6's air restrictor for the inline mag to function.

The inline feature is not fully tested, worse case scenario you get a shotgun cylinder instead.

Might need to sand the bottom of the rim a little bit so it spins smoother.
I recommend lubing any surface that touches the blaster.
Glue the rim to the cylinder or else the blaster might fire the cylinder instead.
This makes the blaster fairly front heavy so I made a skeletonized version if you want to save some weigh and/or volume.

Recommended Setting: 4 walls, 15% gyroid infill, 0.2mm layer height

Shout out to these guys for helping me with test printing this:

LorenzoPerez
Ghost/JPS

Tagi