6 in and 4 in drum

This 6in drum would make a perfect addition to any drummer's arsenal.

Printed in PLA

It uses 65mm M5 screws with a M5 T-Nut.  (I have linked the ones I used.)

I included two different shell heights. 70mm and 60mm.

I used a soldering iron to insert the T-nuts into the bottom “lug”.

Once the t-nuts are in place just find a 6in drum head.  I have used 3 types on this drum and they all work wonderfully.

I have also included an snare attachment.

Hardware

Screws: 65mm M5 screws 

Nuts: M5 T-Nut

Drum Heads

Printed: https://www.printables.com/model/1216377-tpu-drum-head-or-frisbee

Traditional: https://www.sweetwater.com/c1027--6_inch_Drum_Heads?all&sb=low2high

Mesh: https://www.sweetwater.com/store/detail/SN0006--remo-silentstroke-drumhead-6-inch

Print Settings

For the rims and drums walls are the most important infill percentage and type can vary.

    Rims

• Walls - 8

• Layer height 0.2mm 

• Top Shell Layers - 6

• Bottom Shell Layers -7

• Infill - 10% Cubic

    Drums 

• Walls - 8

• Layer height 0.2mm (I also printed at 0.24 with no problem)

• Top Shell Layers - 6

• Bottom Shell Layers -7

• Infill - 7.5% Adaptive Cubic

Accessory

     Snare attachment

• Walls - 2

• Layer height 0.16 mm 

• Infill - 10% Gyroid

Update!

I have added a 4 inch version of this drum.  I have not found any company that makes 4 inch drum heads so you will have to print one out of TPU (File included).

TPU Drum head

• 0.20mm Layer Height

• 4 walls 

• 6 Top Shell Layers 

• 6 Bottom Shell Layers

• 5% Gyroid infill