Batman 13 Head - Dummy 13 v1.0 Head Variant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I combined the head from steriva21's Batman Bust model with the insides of soozafone's Dummy 13 v1.0 model head.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
This is a fully compatible replacement for a Dummy 13 v1.0 head. The head snaps into the frame and stays in place with no adjustments required. Just be sure to match the scale of your Dummy 13 v1.0 sliced file.
I used this to spice up my son's Dummy 13 I printed him and he loved it.
The file itself is far from perfect. You'll find some imperfections around the neck and ears that I was unable to fix in a reasonable time on a low end laptop in Fusion360 (mine's more like Fusion180 at best). With all this said, it still prints as is and works right away. Enjoy!
Print Instructions: printed on Ender 3 v3-SE (Cura slicer)
+ Standard printer settings will work with this file.
Nozzle: 0.4mm
Layer Height: I used 0.2mm (others will work)
Infill: 15% (personal preference)
Temperature/Material: dependent on filament recommendations
Supports: No. Bridging will occur on inside of the model
Build Plate Adhesion: Skirt
Model Orientation: Print with flat part of neck on the build plate (you will have to rotate this in your slicer)
Post-Processing: None, unless you decide to paint it
+ I used PLA for this print, however, if you're concerned about durability or other properties, this can easily be printed in PETG or ABS.
*I am not an affiliate with Batman