Beelink EQ14 10" Rack Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting bracket for a Beelink EQ14 Mini PC, intended for a 10" mini rack, like the GeekPi T1.
- Ocena
- 3 / 5
- Polubienia
- 14
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 928
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
My original design was a 2 piece that bolted together. I didn't like the aesthetic of the screw heads sticking out of this bracket when all the rest of the machines in my rack have flat faces, so I redesigned the model as a single piece. Has large vent holes in the sides to accommodate air flow to the machine. Screw holes line up with the mounting points on the bottom of the Beelink case. They are M3x8mm 0.5 thread pitch, flat head Philips.
Model is exactly 1U tall (1.75" or 44.45mm), 10" wide (254mm) and 116mm deep. Designed to hold the Beelink Mini securely while providing easy access to ports and airflow to vents.
Takes about 8 hours to print depending on your printer speed.
Designed using Fusion 360.