Kabel Halterung mit Schraube und Schmelzgewinde
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kabel Halterung mit Schraube und Schmelzgewinde. Wird mithilfe eines Montageklebeband einem beliebigen Möbel befestigt.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 336
- Wydruki
- 1
- Wyświetlenia
- 2133
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Die Kabelhalterung wurde während eines Twitch Streams entworfen, modelliert und gedruckt. Sie ist so entworfen, dass man sie beliebig häufig öffnen und schließen und einfach an Möbeln befestigen kann.
Das Gewinde wird mittels Lötkolben in das Druck-Teil geschmolzen und an der Unterseite wird ein Streifen Montageklebeband angebracht.
Druckdaten:
- Material: PLA
- Schichthöhe: 0,2mm
- Infill: 20%
- Schichten oben und unten: 3
- Wandlinien: 3
- Stützstruktur: keine
Benötigte Materialien:
- PLA
- Gewindeeinsatz M4 x 8,1mm (Schmelzgewinde)
- Senkkopf Schraube M4 x 10mm
- Montageklebeband
→ENGLISH VERSION ←
The cable holder was designed, modeled and printed during a Twitch stream. It is designed for opening and closing it as often as you like and easily attach it to furniture.
The thread is melted into the printed part by the use of a soldering iron. A strip of mounting tape is attached to the underside.
Print data:
- material: PLA
- layer height: 0,2mm
- infill: 20%
- top and bottom layers: 3
- wall layers: 3
- support structure : no
Required materials:
- PLA
- threaded insert M4 x 8,1mm
- Countersunk head screw M4 x 10mm
- mounting tape