Spicer 2-2-329 Flange Drive Shaft Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This file is uploaded as an example of how easy it is to customize the basic drive shaft spacer OpenSCAD file. This…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This file is uploaded as an example of how easy it is to customize the basic drive shaft spacer OpenSCAD file. This was a request for a particular flange (unsure what vehicle this is for) and it took under 10 minutes to edit the file to include the Spicer 2-2-329 flange dimensions from the web page below: https://www.danaaftermarket.com/spicer-automotive/automotive-driveshaft/flange-yokes/part/drive-shaft-flange-yoke/2-2-329?cat1=LVB&cat2=LV&cat3=FY&cp=0&catalog=PIMS_NA&partType=PART
The STL file is for a 1-1/2" tall spacer.
For a part like this, it would be best to 3D print a sample part, perhaps 3/8" - 1/2" tall and check the dimensions and fit with your flange. Once satisfied with the fit of the part, set up for your desired dimensions. If you need something like an IGES or STEP format file, you can import the OpenSCAD file into FreeCAD and export the desired format file. Send that off to an on-line machining service like Xometry.com, JLC3dp.com, ProtoLabs.com, eMachineShop.com, MFG.com or find a local machine shop and have the part made.
I've not printed or machined this part nor do I have a flange to test fit it to.
Category: Automotive
