Liczymy pasujące modele…
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…
The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…
I printed it in Nylon (Taulmann 645) and it works pretty well.
This is my fifth take on this crucial part… It will be used on the front axle of my new RC car project - Peugeot 3008 RC. This time I wanted to reduce the size as much as possible while still using no screws and keeping the ability to…
Driveshaft Grinding Jig for the Wet Biscuit Upgrade Pack 2 P.S. Use two M3x6 screws to hold the brass rod in place
This is an easy to print version of the driveshaft from the Thermomix WunderJuicer, to replace it in case it broke. A M5x20 BHCS is used to attach the parts together. There is a modifyer body included to increase perimeters and infill for…
Update for 4.1: slightly smaller eff. diameter for less friction Update for 4.2: further reduced eff. diameter for better engagement & slightly higher connecting joint for the rim
This cap covers the M20 stub of the propshaft to protect it from salt during the winter. It is made for my 2004 Opel Corsa C, but should fit a lot of other Opel or Vauxhall vehicles with 5x110 wheel hubs. It should hold onto the M20…
I'm not a big fan of spinning things easily touched by accident, and the drive shafts on the LongMill MK2 do. So I decided to come up with something to prevent any unwanted contact. Easy to attach, easy to remove for maintenance. And easy…
This issue affects every GRE-18 model, and possibly other models that use the same driveshaft. The original driveshaft joint is not strong enough, and the torque causes it to break. This repair part solves the problem and works very well.…
This was printed on a Bambu Lab X1 Carbon. I recommend .2mm layer height. But, the material and infill percentage can be varied according to your needs.
Needed to replace my bad rolling shutter motor. Didn't want to replace by original part as this was too expensive for me and not durable. So I bought something rigid and tough and inexpensive with manual adjustable limit switches.…
Works really well for fixing the issue! Try it for your self. also you can use trx4m driveshafts with these on your trucks! ENJOY!! MRC… Love to see a make of it!! this is the link for the extensions…
If you've bent a driveshaft on one of your rigs, bending them back is an easy way to save some money. You can use a hammer but it's less than ideal, and there are straighteners out there but they cost a pretty penny. The best method I've…
Both the SWB and LWB models used the mounting block from the older pre V4 models. I edited the mounting block to fit the V4 model granite. I loosened the tolerance of the groves a bit. I couldn't get the first version out in a reusable…
Broken the center driveshaft on your ARRMA Kraton/Outcast V2(.5)? Well, here’s a fun way to repurpose the spare spring from it! All you’ll need is: A broken driveshaft e.g. ARA311065 (any of the 4s line will work, but I'm not too sure…
Messy model in Rhino, repaired in Prusa Slicer - will hopefully rebuild if this version works.
print on side for max strength
This a driveshaft replacement for Revell 24830 and 24831 RC cars. Suitable for both front and rear. Must be printed in 100% infill and with supports. Tested successfully with PETG. ABS should be fine as well, but PLA is likely too soft…
I had issues with the driveshaft slipping, and then i saw some bs in the guide about measuring the shafts and printing a plastic customized part to compensate. Screw that, print this, and lightly tighten the m3 screws to the…
A rear driveshaft for the FCX24M. I used a 4mm nozzle and PLA
A simple protective cap for the front driveshaft spline connection, designed for 3D printing using TPU. I printed my own version using TPU 75A. I encountered a problem: the original plastic dust cap on the front driveshaft of my Opel…
This boot fits over the driveshaft slip joint on a 1995 Bronco. Might fit others as well. This was hard to find so I just designed it and printed it out in TPU. Works just fine in protecting the joint from dirt, debris and moisture.
