Driveshaft cover with logo for LongMill MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protection cover for the driveshaft on the Sienci LongMill MK2.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 198
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm not a big fan of spinning things easily touched by accident, and the drive shafts on the LongMill MK2 do.
So I decided to come up with something to prevent any unwanted contact.
Easy to attach, easy to remove for maintenance. And easy to customize if you want another logo.
Nozzle size and layer height are up to you, as is the material.
I printed this in 0,2mm height with a 0,4mm nozzle on an MK3+ with PETG cover and PLA logo.
Attach with screws in already made holes on the endplate.
You will need 3, one for the front of each side of the Y-axis and one for the X-axis on the right-hand side.