1 / 6
Driveshaft for Revell 24830 and 24831 RC cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a driveshaft replacement for Revell 24830 and 24831 RC cars.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This a driveshaft replacement for Revell 24830 and 24831 RC cars. Suitable for both front and rear.
Must be printed in 100% infill and with supports.
Tested successfully with PETG. ABS should be fine as well, but PLA is likely too soft and should break quickly.
Once printed, you must add 12 mm x ~2 mm wires in the holes. (2.5 mm² electric wire worked fine)
