1 / 5
ScanGauge II Ashtray Mount for 1st Gen Tacoma — zdjęcie 1
1 / 5

ScanGauge II Ashtray Mount for 1st Gen Tacoma

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mount for a ScanGauge II that will fit into the ashtray slot on a 1st Gen Tacoma or 3rd Gen 4Runner.

Ocena
0 / 5
Polubienia
9
Pobrania
132
Wydruki
0
Wyświetlenia
717
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

This mount will work for the ScanGauge II device on 1st Gen Tacomas, and should also work for 3rd Gen 4Runners. It is designed to mirror the mounting slides on the stock ashtray, and clips nicely into place when fully seated. The gaps in the model allow you to route the OBD II cable for the ScanGauge behind the center dash bezel.

This file is printed in two parts, one to hold the device, and one for the ashtray slide. I'd recommend printing the slide on one of the narrow edges with some brim and support (see photos for how I arranged it in PrusaSlicer. Use your preferred adhesive to attach the slide to the device mount, I just used super glue on PLA, which has worked fine for me. The device model has a small edge on the backside to help you properly align the slide when adhering the two together.

Tagi