Apple MacBook Pro 2024 14" Under-Desk Mounting for T-Slot Extruded Aluminum Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As screws and adhesives can't do much on my Ikea LAGKAPTEN desk, I wanted an under-desk mount that attaches to rails.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
The piece works well with these t-slot aluminum brackets to hold up two sets of 20mmx20mm t-slot extruded aluminum rails running along the bottom of the desk. I am using 3x USB-C right-angle adapters in my model inspired by CatGunStudio's under-desk mount. It also uses M3x10mm screws to fasten the parts to the rail (I use 14 screws in mine, you can use between 8 and 38 depending on how many you want to use).
I've included STLs for the profiles supporting both the tnutz.com and 8020.net versions of 20mm x 20mm linear rails, as they are different. If you have another profile you want use, please reach out to me.
This is all designed in OpenSCAD using the BOSL2 and bosl2-parts libraries