3ms component housing for 2 stepper motors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact housing for a 3ms MMU project. For 2 stepper motors.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've made this model for the 3ms project. Because there is no 2 Motor setup on printables that i found i made one.
Print Info's:
- Material: PETG
- Layer height Top: 0.2
- Temp: 235°C
- With support
- Infill: 15%
Link to the project: https://3ms.3dcoded.xyz/
Components that i used:
https://www.3djake.ch/de-CH/bigtreetech/skr-pico?sai=11949
https://www.3djake.ch/de-CH/creality-3d-drucker-ersatzteile/metall-extruder-upgrade-kit?sai=10587
https://www.3djake.ch/de-CH/creality-3d-drucker-ersatzteile/stepper-motor?sai=7752
Also some heat inserts and some screws.
Information's:
24.April 2025
Currently i am assembling the project so i don't know how well the components work together.
But i will post updates on how it goes :)
28.April 2025
Ive noticed that i forgot the input-tubes for the extrudes :D So i added them.
Also i moved the cable hole for the sensors a little bit to center them.
Then for all who don't need them i kept the top without them.
All who printed the top already i uploaded the tube-input add-on so you can glue them there if you want them.
Finally added some folders to the Files so its cleaner there.
28.August 2025
Finally got all problems solved.
Now all lines up and you could use the model.