Crazy Twisted Dice Tower V6.2 Dual Path (0% support required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits 12mm or 16mm dice like a charm :) Some refinements based on previous design. Made closed paths so the dice cant…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits 12mm or 16mm dice like a charm :)
Some refinements based on previous design. Made closed paths so the dice cant escape, also extended tower size slightly :))
2-3 hour print, over 90% improvement on previous towers in terms of time.
0% support, but manual assembly is required. Printed as 1 base and multiple sets if stairs. (4x 4 stair and 12x 3 stair, can print each in individual colors if needed)
Be careful during assembly not to bend anything. However once assembled its really sturdy.
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
Category: Dice