Crazy Twisted Dice Tower V6.2 Dual Path (0% support required)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 12mm or 16mm dice like a charm :) Some refinements based on previous design. Made closed paths so the dice cant…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits 12mm or 16mm dice like a charm :)
Some refinements based on previous design. Made closed paths so the dice cant escape, also extended tower size slightly :))
2-3 hour print, over 90% improvement on previous towers in terms of time.
0% support, but manual assembly is required. Printed as 1 base and multiple sets if stairs. (4x 4 stair and 12x 3 stair, can print each in individual colors if needed)
Be careful during assembly not to bend anything. However once assembled its really sturdy.
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
Category: Dice