Reversible Ratchet Wrench 8mm/10mm + Multi-tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big shoutout to w0rkfl0w for helping me with test prints ;D ALSO CHECK OUT MY 10-14mm COLLECTION ;) on my designs…
- Ocena
- 4,75 / 5
- Polubienia
- 23
- Pobrania
- 214
- Wydruki
- 4
- Wyświetlenia
- 1010
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Big shoutout to w0rkfl0w for helping me with test prints ;D
ALSO CHECK OUT MY 10-14mm COLLECTION ;) on my designs page.
I made the insides 10.4mm and 8.4mm because it seemed more accurate.
Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489
Utilizing print in place one-way bearings. No support needed.
This is a design I came up with after working on my 608 Bearing Replacement. Using a 1-way bearing I figured why not try to make a ratcheting tool for lite duty, just to see if it would work. ;D
More sizes available, just check my page :)
If i made a positive impact in your life please support me via paypal :D
https://paypal.me/drewbrewchan?locale.x=en\_US
Thanks for stopping by, come back soon ;)
Category: Tools