Starling Dish - Harbor Freight Flag Pole - Accessory Kit.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of prints to mount Starlink Dish onto a HF flag pole, mount to corner of deck, and pole fall retention rings.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Collection of prints to mount Starlink Dish onto a HF flag pole, mount to corner of deck, and pole fall retention rings.
All printed in PETG.
Retention Rings - Uses 4mm x 14mm or 16mm screws and Nylon lock nuts. Printed in PETG with .20mm layer height, 6 walls, and 25% Gyroid infill. Could also print in ASA or ABS or any outdoor rated filament. Don't use PLA.
Corner Deck Flagpole Mounts - Uses M6x40 bolts and nuts. Printed in PETG with .20mm layer height, 8 walls, and 30% Gyroid infill. Attached to the deck 2x6 with deck screws and used a countersink bit to taper the hold for deck screw head.
Top Flagpole Dish Mount Adapter - Printed in PETG with .20mm layer height and 100% infill.