Starling Dish - Harbor Freight Flag Pole - Accessory Kit.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collection of prints to mount Starlink Dish onto a HF flag pole, mount to corner of deck, and pole fall retention rings.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Collection of prints to mount Starlink Dish onto a HF flag pole, mount to corner of deck, and pole fall retention rings.
All printed in PETG.
Retention Rings - Uses 4mm x 14mm or 16mm screws and Nylon lock nuts. Printed in PETG with .20mm layer height, 6 walls, and 25% Gyroid infill. Could also print in ASA or ABS or any outdoor rated filament. Don't use PLA.
Corner Deck Flagpole Mounts - Uses M6x40 bolts and nuts. Printed in PETG with .20mm layer height, 8 walls, and 30% Gyroid infill. Attached to the deck 2x6 with deck screws and used a countersink bit to taper the hold for deck screw head.
Top Flagpole Dish Mount Adapter - Printed in PETG with .20mm layer height and 100% infill.