3DP RSR Pi - The easiest 3D printer relay ever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 3DP RSR Pi, or 3D Printer Remote Shutdown Relay for Raspberry Pi, turns your 3D printer on or off remotely!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This simple relay can turn your Raspberry Pi 3D printer on or off remotely with a click of a button!
It only needs two parts, an AC relay and a DC relay, plus an optional physical button. The casing prints well with any hard material, and it requires 4 M3 heat set inserts with 5mm outer diameter and 4mm length. It also requires M3 screws, any length from 8mm to 30mm. The AC relay is placed on top for maximum cooling and also has a grille.
There are no supports required, no brim, and print it as fast and hot as you want. There are six small bridges on the bottom piece, but they shouldn't be an issue.
There is a full BOM and setup tutorial at https://github.com/invictus-anic3tus/3DP-RSR-Pi. If you like it, consider starring and following me! I do a ton of cool coding and hardware projects!