1 / 1
Clamping Sleeve for Voron/Monolith pulley dehubbing tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clamping sleeve that is sized 0.4mm wider (0.2mm per side) than the Voron/Monolith pulley dehubbing tool
- Ocena
- 4,5 / 5
- Polubienia
- 15
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 352
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (18)Powiązane
A simple clamping sleeve that is sized 0.4mm wider than the Voron/Monolith pulley dehubbing tool.
The model length (Z length) is 39mm but I actually printed it 25mm long. I also enlarged the opening because my initial print (0.2mm wider than the tool) was very tight. If this is too tight/loose, just scale the model proportionally in both X and Y.
Printed in ABS with Voron standard settings; ends up being pretty much 100% solid print.