1 / 1
Clamping Sleeve for Voron/Monolith pulley dehubbing tool — image 1

Clamping Sleeve for Voron/Monolith pulley dehubbing tool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple clamping sleeve that is sized 0.4mm wider (0.2mm per side) than the Voron/Monolith pulley dehubbing tool

Rating
4.5 / 5
Likes
15
Downloads
120
Makes
1
Views
352
Reviews
2

Updated at source:

Model information

License
GNU General Public License v3.0

A simple clamping sleeve that is sized 0.4mm wider than the Voron/Monolith pulley dehubbing tool. 

The model length (Z length) is 39mm but I actually printed it 25mm long. I also enlarged the opening because my initial print (0.2mm wider than the tool) was very tight. If this is too tight/loose, just scale the model proportionally in both X and Y.

Printed in ABS with Voron standard settings; ends up being pretty much 100% solid print.