3/8 bolt Power Block/Terminal Post
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3/8 bolt power block or terminal post with a 2" spacing that has the same footprint as a Ford starter solenoid.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
3/8 bolt power block or terminal post with a 2" spacing that has the same footprint as a Ford starter solenoid.
Useful if you are removing the fender mounted starter solenoid on a classic Ford. Uses a 3/8 bolt at least 1" long.
Print it with a higher temperature plastic (PETG, nylon, or ABS). Recommend 100% infill. Even at 100% infill this only took about an hour on a Prusa MK4 on fine detail.
This can melt and cause a fire, so know what you are doing if you decide to use it. I am not responsible if it fails. Buy a commercial part of you are unsure.
Mount with two #10 pan head sheet metal screws.