3/8 bolt Power Block/Terminal Post
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3/8 bolt power block or terminal post with a 2" spacing that has the same footprint as a Ford starter solenoid.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
3/8 bolt power block or terminal post with a 2" spacing that has the same footprint as a Ford starter solenoid.
Useful if you are removing the fender mounted starter solenoid on a classic Ford. Uses a 3/8 bolt at least 1" long.
Print it with a higher temperature plastic (PETG, nylon, or ABS). Recommend 100% infill. Even at 100% infill this only took about an hour on a Prusa MK4 on fine detail.
This can melt and cause a fire, so know what you are doing if you decide to use it. I am not responsible if it fails. Buy a commercial part of you are unsure.
Mount with two #10 pan head sheet metal screws.