NC MX-5 Miata USB C Port Aux Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for replacing the stock aux port with a USB-C port from a USB-C female to male USB-A adapter
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 669
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter was done in two pieces. You need to print both, and then put two M3 x 5.7mm brass heat inserts into the long piece
Use two M3 x 8mm screws to secure the long piece to the bracket, take a look at the images to see exactly how they fit up.
Put this specific USB-C adapter (the mold they use might change with time and cause it to not fit) (affiliate link): https://amzn.to/3EErIzM into the long piece, and when the port is flush with the print, screw two M3 x 14mm screws through the holes at the end of the long piece. This will cut small threads into the rubber of the port housing to hold it in place.