NC MX-5 Miata USB C Port Aux Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for replacing the stock aux port with a USB-C port from a USB-C female to male USB-A adapter
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter was done in two pieces. You need to print both, and then put two M3 x 5.7mm brass heat inserts into the long piece
Use two M3 x 8mm screws to secure the long piece to the bracket, take a look at the images to see exactly how they fit up.
Put this specific USB-C adapter (the mold they use might change with time and cause it to not fit) (affiliate link): https://amzn.to/3EErIzM into the long piece, and when the port is flush with the print, screw two M3 x 14mm screws through the holes at the end of the long piece. This will cut small threads into the rubber of the port housing to hold it in place.