Hypertough Shelf Extension Feet for CFS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leg extensions for the HyperTough shelf so the lid on a CFS (and possibly AMS, Ace Pro, etc) can fully open.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I'm using a HyperTough plastic shelf to stack my Creality CFS units. While the stock setup lifts the lid just enough to load a spool, it’s not ideal—you have to hold the cover up and angle the spool to get it in.
Tip: I strongly recommend printing the test fit file first—sizing seems to vary a bit between shelf units. If you need to adjust the diameter, ensure you only scale XY and not Z.
There are 2 versions of the model. The only difference is V2 has a shorter length that goes into the existing leg so the overall print uses less material. I did not test this version but it should be fine and just as stable