Hypertough Shelf Extension Feet for CFS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leg extensions for the HyperTough shelf so the lid on a CFS (and possibly AMS, Ace Pro, etc) can fully open.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I'm using a HyperTough plastic shelf to stack my Creality CFS units. While the stock setup lifts the lid just enough to load a spool, it’s not ideal—you have to hold the cover up and angle the spool to get it in.
Tip: I strongly recommend printing the test fit file first—sizing seems to vary a bit between shelf units. If you need to adjust the diameter, ensure you only scale XY and not Z.
There are 2 versions of the model. The only difference is V2 has a shorter length that goes into the existing leg so the overall print uses less material. I did not test this version but it should be fine and just as stable