Counting matching models…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Mit diesem Adapter können auch Giantarm Spulen mit einem Durchmesser von 195mm im Creality CFS genutzt werden :-) Zum befestigen einfach etwas doppelseitiges Klebeband unter die Flügel.
Here is a cardboard spool RFID adapter for the CFS. Tested and used for more than 2000 hours without issue! This will work with all standard mifare 1k rfid tags. Currently tested and working according to the following: Polymaker…
Edit New MK2 Version available at the link bellow https://www.printables.com/model/1589437-creality-cfs-silca-gel-container-mk2 I didn't like the idea of having to buy the expensive desiccant for the CFS so I created a container to fit…
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
Use same printing as recomended by the original. Remixed in Autodesk Fusion.
The Creality CFS desiccant setup leaves a whole lot to be desired. The packets that come with it are lame and single use. I tried making the desiccant holder that fits in those two slots, but in the end, only the top of the desiccant is…
26Jan2026 Update: I received some feedback that the V3 larger volume holder was rubbing on the top edge. So I trimmed 3mm off of the back edge to provide more clearance, and I made the lid tabs smaller to reduce the potential for them to…
updated version. Don't need sticky velcro to hold it in place.
CFS Filament Removal Tools If you own and use a CFS, you will eventually encounter a filament jam where the filament will not retract. You can try to pull it backwards out back to the reel, but it won't budge. Most of the time, you're…
This is my try of a Silica holder for Creality K2 Plus CFS. I tried and 3d printed some other models but i was not happy by the capacity or the print time and structure. So i give it a shot. I knew i wanted to try a folding structure to…
Hi everyone, If you’ve upgraded to the Creality CFS system , you might have noticed the stock nozzle wiping routine is not using the purge chute nozzle wipe one. I’ve written a custom macro, cfs_nozzle_clear , to make the cleaning process…
Este é um mod completo de reposição do CFS , incluindo cortador de filamento + sensor de corte, descarga de purga e cabo USB do CFS , totalmente compatível com a extrusora original da Creality . Desenvolvi esse projeto para permitir…
So long story short i had installed the BootyCallJones linear rail kit without realizing its not compatible with the CFS Upgrade kit whats so ever. Researched everywhere and every said it was impossible… so i took that personally lol. K1C…
Disclaimer: AI was used to change the printer's background in the picture. However, the picture is of the actual printed models. They were not changed in any way from the original picture. AI was not used for the actual model. Fits the K2…
Update - adding a 5015 6000rpm ballbearing blower on each side of the lid as seen in the picture you get pretty much even temperature distribution throughout the chamber and it works perfectly as a dryer. 50°C set point get you 50- 51°C…
English below Ich hatte immer wieder Probleme dass sich der PTFE-Schlauch von der CFS mit der Filament Führung von der manuellen Zuführung des Creality Hi verhedderte. Ich habe eine Führungs-Platte konstruiert welches dieses Problem…
Having used the previous version for some time I decided it would be a good time to revisit its design. Taking into account feedback, my own and user experience I've added some quality of life features and updated the way the box is…
I am very grateful to the author of this detail for the simplicity of solving the problem of coiling plastic with an empty coil. Here is the original model:…
This is the 2nd modification of the RR High Riser Corner. The first time I only added a PTFE coupler. This time I added a PTFE splitter on the inside (but accessible on the outside) of the riser. This allows the use of both the CFS and an…
Chute for purge material for a K1 with CFS. Didn't like how you couldn't easily unclog the other version out there. This one has slots to use the wire tool that came with my K1 to dislodge anything that gets stuck on the way down. It also…
RU Этот пылесборник (фильтр нити) устанавливается на входной тракт Creality CFS и работает как «щётка»: филамент проходит через мягкий наполнитель, а пыль, стружка и мелкий мусор остаются внутри. Зачем Экструдер меньше загрязняется →…
Holds loose desiccant beads without letting them escape easy to print. PLA/PETG or ABS
Based on original CFS-C Guide in kit but fits better. Print at 0.20 without support upside down. Tested on creality K1-CFS-C but i think it's ok for all CFS-C Printer.
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
I loaded the .3mf with the parts seperated. It should help if you need to adapt the ring. all I did for the STL is export it as one stl in Orca/ Not really experienced in creation, just remixing what others have brought to life. Been…
A side-mounted bracket for the Creality CFS filament hub on the Creality Hi printer. The PTFE tube exits at a slight angle to prevent interference with the spool holder. The holder simply clips on and does not require any adhesive strip.…
A stable, no‑supports stand for the Creality CFS that frees space, improves access, and adds smooth modular storage to the K2/K2 Plus workstation. The drawers slide cleanly, the footprint stays compact, and the whole unit relocates the…
Had some creality filament cleaners that came free with my printer, none of the models I could find would fit so I whipped up my own. Features tapered entry & exit slots to help with inserting filaments, and a knurled exterior to help…
Ive been using the K2 Plus Dual CFS Riser from Hi-Tech Redneck on MW and have always had a hassle when I had issues with filament jams inside the CFS. This usually means some disassembly of the CFS to get the motor loose to move the…
HOW TO THANK A DESIGNER? Post a make! If you like "universal" printer stuff, check out my printer stand/drawer system here: ⚙ Key Features of the spool adapter Sorry the first photo is messy, dang AI photo generator. But look at the other…
I don't need any non-standard, non-20cm spools support. I just needed a quick and simple fix near empty spools jumping on retracting because of too week default springs. I've printed it in PA6, and additionally boiled it for 15 minutes…
I've made the tube entrance longer, for my K1 Max, this made the filament change easier for the CFS.
It is a build plate locker for easier positioning than just two screw heads. Also it contains places for nozzle cleaning silicon brushes in two places. One in the left for CFS upgraded ones, and second in the middle for stock ones…
Description Maximize your footprint and clean up your setup with this top-mount bracket for the Creality K2 SE + CFS system . This bracket lets your CFS sit securely on top of the printer , freeing up valuable bench space while keeping…
DO NOT DISCARD THE 4 SCREWS THAT SECURE THE CFS DURING SHIPPING AS THEY WILL BE REUSED. (You can still use M4 screws if the original ones are unavailable.) Hardware: 2x M3x16 screws 4x original CFS packing screws (or M4 screws possibly)…
READ FIRST : I provided two versions. I highly suggest printing the stronger version. When the CFS is fully loaded, the original version will sag. The stronger version stops this from happening. This is a recreation of @TozzEmak's K2 PLUS…
Second photo shows the modified version on the spool next to the original version. The original includes parametric files for remixing, so you can always start from the original, but I'm including the remix files too.
Update 2025.02.06 Some people have reported that when they printed, the tolerances were too tight for their printer to handle. The original, now called “Tight”, version has tolerances of 0.14 mm. There is now also a “looser” version that…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find different variations of the side and back panels for the CFS riser. You will need to print 3x Left…
You can find the main body here: https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage/ Here you will find the baseplate, large bin, and variations of options for the smaller gridfinity bins for the CFS riser.…
Fixes Creality CFS retraction issues with small spools that can't reach the bumpers on top of the CFS lid. It's a more comfortable solution to spool rings. Comes in 2 variants with different sizes from 1mm to 10mm. The size is the…
Ensure that Prime tower is disabled and flush volume is set to 0 and infill direction is set to 0 As this is a work in progress please comment with any issues found
I use JDJDJD's excellent Smoothy Y-splitter for Bambu's AMS on my P1S and tuned it for my newly arrived K2 Plus. Much of the instructions are provided by him, with thanks. You will need 3 x PC4-M10 ‘black’ connectors which screw into the…
I wanted to put a inline filter in my creality cfs just to make sure no debris gets to hot end. You will need Filament Cleaner https://www.amazon.com/gp/product/B089KMDJV1/ . Bowden Tube Coupler https://www.amazon.com/dp/B01IB81IHG.
Mit diesem Adapter können auch Giantarm Spulen mit einem Durchmesser von 195mm im Creality CFS genutzt werden :-) Zum befestigen einfach etwas doppelseitiges Klebeband unter die Flügel.
J'ai réalisé un adaptateur de bobine pour utiliser mes petites bobines SUNLU de 250G dans le CFS de Creality, aussi compatible avec l'AMS de Bambu. Imprimé en PETG pour une meilleure résistance en cas de choc ou chaleur, mais en PLA ça…
An add-on to Stranula's "K2 Plus CFS Holder" to store the the Creality toolbox included with the K2 Plus next to the CFS, and a few extra slots for individual tool storage. I also included a version without the tool slots so you can…
I decided to build this mod for the CFS just to see if it could be done. Like many of you, I received the Space Pi dual roll filament dryer with my K2 Plus preorder. I have multiple other filament dryers, and really no use for another…
Here is a cardboard spool RFID adapter for the CFS. Tested and used for more than 2000 hours without issue! This will work with all standard mifare 1k rfid tags. Currently tested and working according to the following: Polymaker…
Added more photos for the heat intererts and assembly. You must print on a larger printer since the side pieces are just over 300mm. (K2 Plus or similar) I did print this in PLA but I might go back and reprint it in ABS/ASA. Print…
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
I made this to adapt the new style 250g Sunlu mini spools for use in the Creality CFS used with the K2. It is sized to perfectly fit the CFS and just barely touch the top spring sliders. It also has a tab to lock one side of the spool to…
I designed this as a substitute for the clips in the lid of Creality's CFS, which maintain spring-loaded pressure on the filament spools. I wanted something that required no tools or accessories to make and also fit into the location of…
The holder should fit in the hole on each side of Extrudr 1kg spools. Plug&Play solution to reuse the tags on other spools after reprogramming without renewing the glue or tape. Other brands have spools of the same kind.
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
This is still in the making and I will adjust and upload new revisions as I go along but as is currently everything fits and sticks like it should. Can be used without the covers for creality filament and then there is small, medium and…
Creality K2 & CFS RFID Tag Adapter for Filament Spools Ever wanted to reuse your Creality cardboard filament spools with RFID tags? Now you can! I designed a simple file that lets you attach an RFID tag to a Creality cardboard spool,…
Edit New MK2 Version available at the link bellow https://www.printables.com/model/1589437-creality-cfs-silca-gel-container-mk2 I didn't like the idea of having to buy the expensive desiccant for the CFS so I created a container to fit…
This allows you to have your accesorie filament and the CFS both attached with ptfe at the same time. No more having to access back of machine to swap for single color prints not using the CFS. F3D files included to make your own mods…
This replaces the tube coupling on the back of the K2 Plus to allow connection of the side spool holder and the CFS at the same time. Can also be used with a drybox. Can be used with CFS buffer mounted on the printer or on the CFS.…
Designed to print without support. Both parts will fit on the build plate together. Recommend PETG, ABS or ASA since the venting of the unit will be passing when the ventilated cover is open. including Fusion 360 files for those who want…
CFS Drybox – Designed for the Creality Filament System (CFS), Compatible with K2 Plus & Creality Hi, Featuring EasyFill Lid Keep your filament dry and moisture-free with this CFS-compatible Drybox, designed to work seamlessly with the…
Die Silica Fächer im Creality CFS System sind nicht besonders groß. Alternativ ist im Spulenkern des Filaments noch Platz. Daher kann man hier diese gefüllten Container einlegen. So lässt sich das Trockenmittel im CFS vervielfachen und…
Je vous partage les fichiers de mon ami NOX pour modifier votre CFS de votre Imprimante Creality K2 Plus Combo Vous avez besoin de 4 x ressort de traction 5 × 20 32 x roulement à bille 8 × 4 mm m3 8 x Entretoise F, F, m3 x 15 mm 24 x vis…
Firstly, I used the connector end from PTFE Bowden Tube Connector , so credits to @firstgizmo for that portion. The main aspects of this, however, are completely unique. If you would like to support my efforts, buy me a beer . I want to…
A simple and easy to print tab that snaps onto Sunlu filament spools to securely hold RFID tags in the correct position for the Creality Filament System (CFS) to read. I am using this legend from Reddit's android app to write my own RFID…
Hallo Hier finden Sie einen Creality K2 Plus LED Riser für den CFS-Druck Die obere Glasscheibe kann zur Belüftung ca. 100 mm nach hinten geschoben werden Der Riser ist geklebt und geschraubt Das CFS wird einfach aufgelegt und mit Stiften…
A remix of the original adding on a thumbgrip to make it easier to pull the bins out when it's time to recharge. Original Design by Tek: https://www.printables.com/model/1151505-creality-k2-plus-cfs-desiccant-box-optional-lid
Loved the version 3 and 7 posted by MediaMan3D. They do work well with the V-Spooler from Fryby Additive. https://makerworld.com/en/models/98832 and https://www.printables.com/model/684376 But I needed to adapt it to work with the…
This modification improves the retraction of the Creality CFS spool, especially when using lighter spools. It also enhances compatibility with smaller spool brands like Sunlu. You'll need a standard 22x7x8 bearing for the spool, along…
Description This is a holder for Desiccants in your CFS. I have my own mounted with a couple of Power Strips, and it seems to stay there :) I have included a .3mf file for the K2 Plus, and also a .step file if you want to slice it with…
All other parts are the same as the original by Mdalacu. I just hacked the arm to accommodate some 12mm springs I have. Should be a snug fit, if not use a little glue.
Cleans your filament before it enters the CFS. In my pictures I've printed it using a 0.2mm nozzle on my K1C for a smoother transition but it should work with 0.4mm nozzles as well (I did not test this though). No supports required.…
Had a cardboard spool that was too small for my CFS. Looked for a good printable replacement and didn't find one that had all the things I wanted. This is based off of a Creality plastic spool's dimensions and the features I would want…
Attention!!! I do not know the distances from the back wall to the new silicone brush and the plastic drop-off point when CFS replacing filament. At the moment, I can assume that for the modifications with rails, it will be necessary to…
I wasn't seeing RFID tags/spacers that where usable on the AMOYBABY and FLASHFORGE spools I had. So… made this to share. I'm sure it will fit several other spool brands. Designed to fit spools with 190mm diameter measured from filament…
Con solo 3 viti e qualche ora di stampa questo sistema è comodo e facile da montare. Layer 0.2 Nessun supporto 3 pareti Facilissimo da stampare.
created a little funnel to help aid in filling the desiccant
Attention!! I do not know the distances from the back wall to the new silicone brush and the plastic drop-off point when CFS replacing filament. At the moment, I can assume that for the modifications with rails, it will be necessary to…
PLA Hyper White fits perfectly, set pressure to 100.42%. Support automatically, always place parts on the outer sides (arrows follow) Infill 25% is sufficient for 30 KG. Necessary for this: 8 M4 threaded inserts. 8 M4 countersunk screws,…
CFS riser for your Creality CFS/AMS designed to fit 25mmx25mm aluminium extrusion or box section print on the angled corner with no supports needed!
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
This is a simple Remix of the Original-Parts, to not Print Parts in Mid-Air and even make the part with only 45Degree Edges All Other Parts can be used from the Original Part-List-Needed for 1 CFS: 32x 693ZZ Bearings ( 8 for each Pusher )…
If you have experienced problems with the bowden tube popping out of the CFS, this may help. Printed in TPU with at least 4 wall loops and 6-8 top and bottom shell layers. Layer height is 0.1 mm
This stand is for Creality K2 Plus and can be used for the K1 series. Be sure to use the curved cross rails between the 4th and 5th layer for the lid to clear. Added files for the drawers.
A two-colour sign can be printed on single-filament printers with a simple pause where you can change your filament when writing your gcode. Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Infill:** 15%…
I created a traditional (multi-part) version of my diamond faceted checkered color bowl There are two “parts”, insert as a single multi-part object. The parts do not overlap. I created two thicknesses, 2mm and 2.4mm. My bowls are usually…
Please make sure to use PETG as this will be holding nearly 6kg of weight Make sure to follow this exact settings to make sure the strength and a smooth print Material : PETG or PETG-CF Infill : 30% Thickness 0.2mm Support : ON And you…
📌 K1 Max – 180° Slim USB Adapter for CFS Kit This is a compact 180-degree USB-A extension , perfect for tight spaces. Designed specifically for the Creality K1 Max and CFS Kit. 🔧 Features : Ultra-slim profile 180-degree angled USB-A male…
*****Version 2 now ready.**** Redesigned to be stronger, uses nuts and bolts to join middle pieces. 8x m4 nuts 8x m4x12 screws Moved my CFS unit to underneath the printer, the printer is on top of the popular Ikea lack table. My…
Hi, This is my take on a tool to help release filament from the gears in the CFS's 4 way hub. This is useful if you experience a jam and need to manually retract the filament back to the CFS. The position and firmness of the motor release…
Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx). This mod serves 2 purposes: Takes out any guesswork for the correct placement of the nozzle…
New Version here: https://www.printables.com/model/1259112-k1k1c-cfs-purge-chute-v2 So i like everybody else got tired of scooping up the filament poop at the bottom of my K1C. i legit learned to 3d model just to make this… no im serious.…
Print in ABS/ABA/PC to prevent pla from sticking inside!!!! For extra nonstick apply PTFE Liquid/Spray Made the other one in a rush but this one is a more brushed up version. Wider tube angle no longer requires specific screw size .5mm…
The base pan tray is designed to provide a sturdy and stable surface for a 3D printer or other machinery, ensuring that debris generated from the CFS filament poop process is neatly contained and easily removable. This is my first model…
*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. CFS Mount for the Riser V3 - This is a custom MOUNT to install the CFS unit on top of the RISER V3. /////ATTENTION - V1.2…
