1 / 2
K1C Riser Corner for CFS & External Spool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tall riser corner for K1C with internal PTFE splitter
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the 2nd modification of the RR High Riser Corner. The first time I only added a PTFE coupler. This time I added a PTFE splitter on the inside (but accessible on the outside) of the riser. This allows the use of both the CFS and an external spool holder. I used a modified version of the "Smoothy" PTFE splitter that I found on Maker World.
2 - M3x18 socket head screws
2 - M3 heat set inserts (I used M3 x 4.2mm W x 6mm D since I had them on hand)