1 / 3
K2 PLUS CFS HOLDER
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds CFS on K2 Plus without needing top panel. Allows top panel removal/addition without removing the CFS.
- Rating
- 3.5 / 5
- Likes
- 124
- Downloads
- 664
- Makes
- 2
- Views
- 7,716
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
DO NOT DISCARD THE 4 SCREWS THAT SECURE THE CFS DURING SHIPPING AS THEY WILL BE REUSED. (You can still use M4 screws if the original ones are unavailable.)
Hardware:
- 2x M3x16 screws
- 4x original CFS packing screws (or M4 screws possibly)
Print Instructions:
- BOTH PARTS FIT ON ONE PLATE
- DO NOT PRINT IN PLA (The printer heats up significantly when heating the chamber.)
- Recommended material: ABS
- Minimum: 3 walls, 25% infill
- Use supports for optimal results
Assembly:
- Remove the 2 top screws from the back panel of the K2 Plus.
- Using the 4 screws from the CFS packaging, hand-tighten the printed parts to the bottom of the CFS.
- Align the back of the CFS with the back panel holes and tighten the M3 screws.
- Secure the 4 screws holding the CFS.