1 / 7
Creality K2 CFS Silica Container für Filamentspulen — image 1
1 / 7

Creality K2 CFS Silica Container für Filamentspulen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Die Silica Fächer im Creality CFS System sind nicht sehr groß. Daher für den Spulenkern einen Filament Container

Rating
4.667 / 5
Likes
77
Downloads
502
Makes
3
Views
1,831
Reviews
3

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Die Silica Fächer im Creality CFS System sind nicht besonders groß.

Alternativ ist im Spulenkern des Filaments noch Platz.

Daher kann man hier diese gefüllten Container einlegen.

So lässt sich das Trockenmittel im CFS vervielfachen und der Container wird beim Wechsel der Spule einfach in die Neue Spule eingelegt.

Der Rand verhindert, das der Container aus der Spule rutscht beim drehen der Spule

V2 - Model nochmal nachgearbeitet und den Boden als auch den Deckel verstärkt, da das Gitter brechen kann, wenn der Container auf den Boden fällt.

V4 - Model im Bauch schlanker gestaltet, da es unterschiedliche Spulen für das Hyper-PLA gibt, eine Variante ist im Mittelloch von beiden Seiten Konisch. Dadurch fällt der Behälter im CFS schon durch Erschütterungen aus diesen Spulen weil der Behälter in der Spule kippt. Durch die Verschlankung in der Mitte des V4 Behälters wird das verhindert.

Diese Spulen sind an den Verdickungen der Speichen wie auf dem Bild zu erkennen.

Einfülltricher für das Gel hinzugefügt.

---------------------------------------------------------

The silica compartments in the Creality CFS system are not particularly large.

Alternatively, there is still space in the filament spool core.

Therefore, you can insert these filled containers here.

This way, the desiccant in the CFS can be multiplied and the container is simply inserted into the new spool when changing the spool.

The edge prevents the container from slipping out of the spool when the spool is rotated

V2 - Model reworked and the base and lid reinforced, as the grid can break if the container falls to the ground.

V4 - Model designed to be slimmer in the belly, as there are different spools for the Hyper-PLA, one variant is tapered in the middle hole on both sides. This means that the container in the CFS falls out of these spools due to vibrations because the container tips over in the spool. The slimming down in the middle of the V4 container prevents this.

These coils can be recognized by the thickening of the spokes as shown in the picture.

Category: 3D Printer Accessories

Tags