Creality CFS RFID-reusable-spool-hex
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed bambu labs reusable spool by MediaMan3D to incorporate the RFID tags programmable via the RFID for CFS app.
- Rating
- 4.857 / 5
- Likes
- 309
- Downloads
- 1,957
- Makes
- 7
- Views
- 7,383
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v2.0
Loved the version 3 and 7 posted by MediaMan3D. They do work well with the V-Spooler from Fryby Additive.
https://makerworld.com/en/models/98832
and
https://www.printables.com/model/684376
But I needed to adapt it to work with the Creality CFS RFID system as well.
I cleaned up some of the edges under the label on the snowflake version.
Then added a round dish to accommodate the 1" (25mm) MIFARE 1k RFID tags that can be programed via the “RFID for CFS” app. https://play.google.com/store/apps/details?id=com.lot38designs.cfsrfid&pcampaignid=web_share
RFID Tags can be found here: https://www.amazon.com/dp/B081CFXCBJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Added a snap in cover for the RFID tag. (I tried to use a pause to place the tag and print over it to hide it in the middle of the print, but the tag kept warping during the next layer bridging.) So I made a cover that snaps into a small groove. For me I found the cover snaped in, but was a little loose at a size of 27.1mm. However it was a bit tight and bulged at 27.2mm. You may need to adjust the scale of just the cover in your slicer depending on your tolerances.