CFS Stand/Tray - Moveable on wheels.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A moveable CFS stand designed with no hardware other than castors needed.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 0
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
*****Version 2 now ready.****
Redesigned to be stronger, uses nuts and bolts to join middle pieces.
8x m4 nuts
8x m4x12 screws
Moved my CFS unit to underneath the printer, the printer is on top of the popular Ikea lack table.
My requirements:
- Friction fit castors
- Securely hold the CFS.
- Holes underneath for the CFS feet to drop into
- No nuts and bolts - removed this requirement for V2 to make it stronger.
Castors utilised : https://www.amazon.co.uk/dp/B07D7VGR1F
Could edit to use other castors, I liked these ones as had the dimensions on product page so was able to design before they came.
To build print:
- 2x of PartA and 2x PartB. Identical parts go onto opposite corners (i.e. front left and rear right).
- 2x Simple joiner
- 1x Middle joiner
I have attached a file for a simple handle to pull it out but found this wasn't needed for me. Could design your own of any style just extend the face of a simple joiner to it goes out further than the CFS unit.