1 / 9
K1 MAX – 180° Slim USB Adapter for CFS Kit — image 1
1 / 9

K1 MAX – 180° Slim USB Adapter for CFS Kit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small adjustment for the CFS kit so that the USB adapter doesn't stick to the front of the printer

Rating
0 / 5
Likes
61
Downloads
190
Makes
1
Views
2,121
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

K1 Max – 180° Slim USB Adapter for CFS Kit

This is a compact 180-degree USB-A extension, perfect for tight spaces.
Designed specifically for the Creality K1 Max and CFS Kit.

Features:

Ultra-slim profile

180-degree angled USB-A male to female

Perfect fit for clean cable management

Uses individual wires or short USB cable (approx. 7 cm)

Build Notes: I used individual wires inside the case and soldered everything by hand.
Total length is about 7 cm, and the device was tested with a USB flash drive — worked perfectly! (Now tested with CFS, it worked perfectly too! :D)

Tips:

Make sure to test with your device before sealing the case

Use hot glue or epoxy to secure the USB ports if needed

 

Feel free to remix or improve the design — and let me know if you use it! 😊

 

UPDATE 1: In the V1 model I used connectors taken from scrap
In the V2 I used connectors bought at a local electronics store 

Connector size: 

Male: 12x4,5x25mm

Female: 13,3x5,7x16,7mm

 

Male USB

Cut it so that it has ~15mm on the metal part and it should have 18mm in total

 

USB female with 14mm in the metal part

 

Internal view of the connector

 

To fix the male connector in place, you can use hot glue, super glue, etc.

Tags