K1 MAX – 180° Slim USB Adapter for CFS Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small adjustment for the CFS kit so that the USB adapter doesn't stick to the front of the printer
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 190
- Wydruki
- 1
- Wyświetlenia
- 2121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
K1 Max – 180° Slim USB Adapter for CFS Kit
This is a compact 180-degree USB-A extension, perfect for tight spaces.
Designed specifically for the Creality K1 Max and CFS Kit.
Features:
Ultra-slim profile
180-degree angled USB-A male to female
Perfect fit for clean cable management
Uses individual wires or short USB cable (approx. 7 cm)
Build Notes: I used individual wires inside the case and soldered everything by hand.
Total length is about 7 cm, and the device was tested with a USB flash drive — worked perfectly! (Now tested with CFS, it worked perfectly too! :D)
Tips:
Make sure to test with your device before sealing the case
Use hot glue or epoxy to secure the USB ports if needed
Feel free to remix or improve the design — and let me know if you use it! 😊
UPDATE 1: In the V1 model I used connectors taken from scrap
In the V2 I used connectors bought at a local electronics store
Connector size:
Male: 12x4,5x25mm
Female: 13,3x5,7x16,7mm
Male USB
Cut it so that it has ~15mm on the metal part and it should have 18mm in total
USB female with 14mm in the metal part
Internal view of the connector
To fix the male connector in place, you can use hot glue, super glue, etc.