1 / 3
HDM-K1,K1C,K1SE,K1A left motor mount for CFS — image 1
1 / 3

HDM-K1,K1C,K1SE,K1A left motor mount for CFS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The motor mounting model is suitable for HDM K1(hdm-utah), adjustments may be needed for the rest of the lineup.

Rating
0 / 5
Likes
17
Downloads
60
Makes
0
Views
931
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Attention!! I do not know the distances from the back wall to the new silicone brush and the plastic drop-off point when CFS replacing filament. At the moment, I can assume that for the modifications with rails, it will be necessary to model and print a different version of the plastic drop-off point, because the original carriage is 23mm wide, while the rail modifications (BCJ, HDM, Kemsky) are 14mm wider than the original carriage.

 

A simplified model for mounting a new part called 'cutter block' for K1 Series printers. If you have installed full linear Rails from hdm-utah mod,and want to buy CFS with K1 Series Kit, this part is really necessary for you. The model is still in development; I haven't received my CFS yet

For the former belt tensioner use 4x M3 Voron Brass nuts(M3*OD5*L4) to secure the cutter block. Use 2x(or 4x) stock m3x16 shcs screws 


 

Tags