QC 3.0 24w module panel mount (Single and Double)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the panel mount designed for AJ27-TIE 24w QC 3.0 USB module, with 2 variants: single board and dual stack.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
2025/12/08 update:
Increased tolerance by 0.2mm so the board can be installed easier without having to use force.
=====
This is the panel mount designed for AJ27-TIE 24w QC 3.0 USB module.
They have a variant with 2 ports side by side, but I want them stack on top of each other hence the double stack version of this mount.
The board can be installed afterward and can be removed independent of mount.
Included cutout template
2 versions: single board, and double stack.
To secure the board after installation, use a small ziptie or an insulated metal cable tie. (Refer to 2nd or 4th picture)