20 modeli
Bought this 2 port DC-to-USB buck converter, and needed a case for it. Here's the item: https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099513216091 It's pretty straightforward, print both sides flat as in the STL. My DC plug…
Case for a very successful fast charging module powered from 6V to 35V QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V … https://aliexpress.ru/item/4000315671112.html
Case for CTP01 QC3 board (9v 2a 18w max). I designed this case with some space at the back so you can tie a knot to act as strain relief. The weird design of the lid is because I want it to push the board and keep it in place inside the…
very easy to print heaphone holder, ideal to be stick with command strips size M. the most perfect fist layer for this is given by an ultrabase / glass printbed for the command strip to stick perfectly due to the shinny finish of the…
There are several models available for the QC35 headphones, but none that I saw have a vertical mount that I could use - so I made one. Maybe you can use it too. Does not need support, the bottom cutouts are at 45°. Shouldn't need a lot…
Printed without supports with 15 % infill 0.2mm layer PLA Unlike the original model, it does not contain holes for screws (I attached it with double sided tape)
QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V Step Down Buck Boost Module for Huawe SCP/FCP
Add on Accessory for Makita Tool Battery (18V to 21V) with 4 switched outputs. 4 USB QC3, Apple, Samsung etc Fast Charger. 6W LED low power Emergency Light. (truck/trailer side light 12 to 24V) 48W LED high power Spot Light. (auto spot…
Mounting case for CTP2 with M3 holes.
A big-capacity power bank with a special design to protect the USB connectors when carried in a bag or pocket. Powerful enough to use as a power source for a TS80 soldering iron. With info for the electronics module and build…
A small enclosure for a PoE injector and QC 3.0 charger designed to sit on top of the RD6012 PSU ‘kit’ sold all over aliexpress and banggood. PoE injector is nice to have from time to time and QC3.0 is useful doe charging devices and…
The rubber in the power button eventually degrades. You can tear the button off, stick this printed part in, then cover it with vinyl (electrical) tape for a fully functioning repair. It's just a 3mm×3mm×6mm cube, but now you don't need…
I use the Freeman KEYQC3 Pull Apart Coupler Keychain ( https://www.amazon.com/gp/product/B077CSHG3N/ ) for many of my keys. I typically attach the female end to my house keys and use the male ends for my car, motorcycle, and bicycle keys.…
I got tired of how the velcro constantly shook on my delanclip, so I designed this mount for the tracker. It slots in place and is removable. There is a clip that secures the clip to the top part of the headphones, but you can easily cut…
I used OnShape to remix the clip attachment for my Bose headphone. You can edit it here: https://cad.onshape.com/documents/c173f552fd113de23724bfac/w/53afca30c4018844fb5f12d0/e/301fb3305e7c06a7c5feeac1 and make you own attachment. I used…
I was repairing my headphones and lost the switch. Could not be bothered searching for it, Im sure the original will pop up. STL is not perfect but it works. I did file the top surface for smooth operation, I did shave off some of the…
USB C Battery Pack with QC3.0 and Overheat Protection. 3D Case for a Charger Board, fitted with reused 3.7V 8000mAh Lithium Polymer Packs, up to 2 in Parallel. The Cover is removable with 4 Screws, M3x20mm. The Charger Board has a…
wall shelf for charging station
I needed a case to protect the pins of the relay so I created it
I remixed Sunookitsune's Ryobi DC power jack to instead provide two independent USB QuickCharge 3.0 ports. I printed them in ABS and PETG. They both worked fine. What you need to complete the work 4x 16mm M3 screws (same as before) 2x…
