1 / 4
Case for QC3.0 QC2.0 USB DC-DC Buck Converter, Charging Step Down Module 6-32v
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for a DC to USB Converter found at TEMU.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 270
- Wydruki
- 0
- Wyświetlenia
- 1225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
Bought this 2 port DC-to-USB buck converter, and needed a case for it.
Here's the item:
https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099513216091
It's pretty straightforward, print both sides flat as in the STL. My DC plug actually was soldered crooked so I had to shave some of the plastic from the side to make up for it, but I'm sure most will turn out fine as is.
Just use 4 3mm screws to fasten it down.
I used Prusaslicer's text function to add the text to the bottom.