Makita Battery 5V USB QC3 LED Spot Light XT60 DC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add on Accessory for Makita Tool Battery (18V to 21V) with 4 switched outputs. 4 USB QC3, Apple, Samsung etc Fast…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 707
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Add on Accessory for Makita Tool Battery (18V to 21V) with 4 switched outputs.
4 USB QC3, Apple, Samsung etc Fast Charger.
6W LED low power Emergency Light. (truck/trailer side light 12 to 24V)
48W LED high power Spot Light. (auto spot light 12 to 24V)
XT60 DC connector Battery Voltage Output.
recessed 5.5 2.1 DC connector part of USB QC3 PCB.
5.5 2.1 DC connector Battery Voltage Output shared with USB Power Input.
5.5 2.1 connector can be used for power Input from laptop charger to power USB charger when Makita battery is not used.
If USB is switched on power can also be feed to LED lights and XT60 connector.
I use the XT60 connector to power TS100 soldering iron.
4 Switches KDC-11 3A 250V
6 M4x16 or 20mm pan head screws
Makita Battery Contact 643860-3 https://www.thingiverse.com/thing:863257
Battery Socket is a remix of https://www.thingiverse.com/thing:4797077
USB QC3 Module
https://www.amazon.com/Liangcha-0401-Converter-Charging-Charger-Circuit/dp/B08P1T9VV2
LED Spot Light
Led Side Marker Lights Warning Lights LEDs Trailer Truck
Updates Nov 2021
Added version with 6W LED light removed, found it was not very bright or useful.
Also added a version with second XT60 connector, moved 48W LED mount to center of top.
Added version with no 48W LED mount, no holes in top if you don't want LED light or want to drill holes to mount your own type of LED light.
Print Settings
Printer:
Geeetech E3D V6
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
20
Filament: Generic PETG, PLA, PLA-F Any
Notes:
4 Walls.
use support blocker for all threaded holesCategory: DIY