1 / 3
CleanAce Air Purifier Bracket for Toyota Sera (EXY10)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printable bracket for mounting a Toyota CleanAce Air Purifier to a Toyota Sera.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this bracket as my Sera did not come with a Clean Ace air purifier, and a bracket was impossible to find. Uses McMasterCarr - M3.5 x 6mm Self-Tapping Screws90380A361 attaching the air purifier to the mount.
Only tested with period-correct CleanAce as pictured- unknown compatibility with newer CleanAce's.
Printing Instructions
- Material: ASA (required for heat tolerance in the cabin- PETG will NOT work.)
- Walls: 6 walls
- Infill: 100%
- Print on the longest length flat on the bed. Adhesive is recommended to keep the print from warping up, as well as an enclosed chamber. However, very slight warping (<2mm) is okay.
Provided as-is. No warranty expressed or implied.