1 / 3
CleanAce Air Purifier Bracket for Toyota Sera (EXY10) — image 1
1 / 3

CleanAce Air Purifier Bracket for Toyota Sera (EXY10)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 3D-printable bracket for mounting a Toyota CleanAce Air Purifier to a Toyota Sera.

Rating
0 / 5
Likes
0
Downloads
15
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

I made this bracket as my Sera did not come with a Clean Ace air purifier, and a bracket was impossible to find. Uses McMasterCarr - M3.5 x 6mm Self-Tapping Screws90380A361 attaching the air purifier to the mount.

Only tested with period-correct CleanAce as pictured- unknown compatibility with newer CleanAce's.

Printing Instructions

  • Material: ASA (required for heat tolerance in the cabin- PETG will NOT work.)
  • Walls: 6 walls
  • Infill: 100%
  • Print on the longest length flat on the bed. Adhesive is recommended to keep the print from warping up, as well as an enclosed chamber. However, very slight warping (<2mm) is okay.

Provided as-is. No warranty expressed or implied.

Tags