JetKVM case - magnetic feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little JetKVM case with feet and inserts for 10x3mm magnets I made this so I can mount it magnetically to my PC or rack
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 635
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
UPDATE: I created another version without the specific cutouts for the ports on the back.
I suggest using this model because of the tight fitting of the HDMI port.
I also made the feet for the magnets bigger to fit 10x3 mm magnets for this model.
---
Little JetKVM case with feet and inserts for 6x3mm magnets.
I made this so I can mount it magnetically to my PC or rack.
I suggest stronger magnets or make the feet / inserts a bit bigger, because the JetKVM is a bit on the heavier site. Still it works for my purpose.
Also the tolerances are pretty tight, I printed on the BambuLAB P1S 4mm nozzle on the 0.20 mm standard preset with 15% infill using PLA.
It will be hard to remove the JetKVM from the case without breaking it using my settings.
I used tree supports for the feet an the front part and printed the model with the opening for the ports on the printbed.
I also add the part where i measured the ports, so you can design your own model.
