1 / 4
Duty Speedholster // G7 G9 Recover Tactical — zdjęcie 1
1 / 4

Duty Speedholster // G7 G9 Recover Tactical

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a speedholster that is secure enough to be used for duty.

Ocena
0 / 5
Polubienia
9
Pobrania
144
Wydruki
1
Wyświetlenia
836
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

update 03.05.2025
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  • made changes to the tolerances of the clamp and changed the angle of some corners to better fit different pistol models. 
  • added an alternative duty spring with a lot more retention

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

a speedholster that is secure enough to be used for duty. big thanks to Maverick0197 for reverse engineering the G7 Recover Tactical. 

differences to the original G7: The holster is 4mm wider to cover enlarged trigger guards of competition pistols such as the Shadow 2 or XFive Legion and to make the clamp sit tighter and more secure due to a different screw placement. Due to the enlargement this holster is not ambi anymore, while the clamp still is. Make sure to mirror all holster parts if you are left-handed.

- step files will follow once it is all cleaned up.  -

needed harware for the clamp:

  • 1x M4x16
  • 1x M4 nut
  • 1x M3x16
  • 1x M3 nut

for the fork:

  • 2x M4x12
  • 2x M4 nut


for the mount:

  • 1x M4x16
  • 2x M4x12
  • 3x M4 nut

print instructions: 

  • .2 layer height
  • 20% hexagonal-infill
  • 5 walls, 6 top-layer, 6 bottom-layer
  • clamp needs to be Nylon or PCTG due to increased heat at the barrel exit
  • all other parts can be printed in PETG or PLA+

troubleshooting:

  • if the springs do not fit in, make sure to scrape remaining support interfaces from the fork and make sure they are correctly oriented before applying pressure.
  • do not remove the spring from a hot heatbed, it might deform the spring. let it cool
  • if the clamp sits loosly on your pistol while the screws of the clamp are not fully tightened please contact me an I can adjust the clamp to your individual accessory rail.