Duty Speedholster // G7 G9 Recover Tactical
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a speedholster that is secure enough to be used for duty.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 144
- Makes
- 1
- Views
- 836
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
update 03.05.2025
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- made changes to the tolerances of the clamp and changed the angle of some corners to better fit different pistol models.
- added an alternative duty spring with a lot more retention
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
a speedholster that is secure enough to be used for duty. big thanks to Maverick0197 for reverse engineering the G7 Recover Tactical.
differences to the original G7: The holster is 4mm wider to cover enlarged trigger guards of competition pistols such as the Shadow 2 or XFive Legion and to make the clamp sit tighter and more secure due to a different screw placement. Due to the enlargement this holster is not ambi anymore, while the clamp still is. Make sure to mirror all holster parts if you are left-handed.
- step files will follow once it is all cleaned up. -
needed harware for the clamp:
- 1x M4x16
- 1x M4 nut
- 1x M3x16
- 1x M3 nut
for the fork:
- 2x M4x12
- 2x M4 nut
for the mount:
- 1x M4x16
- 2x M4x12
- 3x M4 nut
print instructions:
- .2 layer height
- 20% hexagonal-infill
- 5 walls, 6 top-layer, 6 bottom-layer
- clamp needs to be Nylon or PCTG due to increased heat at the barrel exit
- all other parts can be printed in PETG or PLA+
troubleshooting:
- if the springs do not fit in, make sure to scrape remaining support interfaces from the fork and make sure they are correctly oriented before applying pressure.
- do not remove the spring from a hot heatbed, it might deform the spring. let it cool
- if the clamp sits loosly on your pistol while the screws of the clamp are not fully tightened please contact me an I can adjust the clamp to your individual accessory rail.