Keyboard Switch Tester & Keycap Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solid switch holders for mechanical keyboard switch testing or to show off your artisan keycaps!
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 661
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3, 4, & 5 switch holders with 1.4mm and 1.5mm plate thicknesses. Fits standard Cherry MX / Kailh switches. I wanted a more solid and enclosed switch tester with no flex to equally compare different switches to each other. Try both the 1.4mm and 1.5mm plate thickness models to see which fits your switches the best.
Printing Suggestions
At least 15% infill. I tried 100% infill, but the parts actually transmitted more sound through the material.
1.4mm plate versions:
0.1mm or 0.2mm layer height is recommended.
1.5mm plate versions:
0.1mm or 0.15mm layer height is recommended.
No supports necessary, the part files are oriented for printing.