DX Commander SOTA Pole Guy Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A guy rope plate to go on the 3rd section of the DX Commander SOTA pole.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1073
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A guy rope plate to go on the 3rd section of the DX Commander SOTA pole.
This fits over the top of the pole when you are extending it and when you raise the 3rd from the bottom section it will sit snuggly on the pole. The inside edge is slightly rounded to prevent any damage to the coating of the pole.
There are three 10mm holes on the points to attach your guy lines to with your method of choice.
I have used this in winds up to 20 mph with no flex seen in the plate.
Printed on a Prusa MMU2s.
0.3mm with a 40% infill.
I have included the Fusion files to make it easy to remix for your own pole.