W-Resources M-01 Metroplex Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand to keep the weight off the hips of the W-Resources M-01 Metroplex action figure.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stand to keep the weight off the hips of the W-Resources M-01 Metroplex action figure. This is based off of the original design of The Reflector Files who made it out of wood. I have modeled it to be printable. There is a 5mm hole down the center if you wish to accommodate a rod for support. This can support a 3/16 metal, wooden, or fiberglass rod. There are also alignment pegs which you may find is enough to support the figure. I recommend printing this from petg but pla may be good enough. Please use at least 3 walls. Note you will need to spread the hips out a little to fit the stand.